EVIL ENERGY 3/8" (6AN) Push-Lock Fuel Hose 20ft with 10 Clamps — CPE/NBR Reinforced, 650 PSI Working

EVIL ENERGY 3/8" (6AN) push-lock fuel line is a 20-foot CPE/NBR high-pressure hose engineered for petrol, diesel and oil routing, supplied with ten stainless-style clamps for reliable sealing.

This kit combines a 20-foot length of 3/8" inner diameter (6AN) fuel hose with a reinforced polyester layer between CPE outer and NBR inner compounds and a set of ten clamps sized for 13–19 mm fittings. It’s built to handle elevated working pressures and repeated use in automotive, marine and industrial fuel systems where a flexible, push-to-lock connection and added clamp security are required.

How tough is this hose under pressure and temperature?

The EVIL ENERGY 3/8" hose is designed for demanding operating conditions. It supports a maximum working pressure of 650 psi and resists rupture up to roughly 1,180 psi, while remaining functional across a wide temperature band.

• Working pressure: up to 650 psi.
• Burst/rupture rating: approximately 1,180 psi.
• Operating temperature: -4°F to 212°F (-20°C to 100°C).
• Minimum bend radius: 66 mm for safe routing without kinking.

What materials make this hose compatible with fuels and oils?

This fuel line combines a chemical-resistant NBR rubber inner layer with a durable CPE outer jacket and a polyester-reinforced core, creating a balance of fuel compatibility, abrasion resistance and pressure containment. The construction minimizes permeation and softening when exposed to petrol, diesel, engine oil and similar fluids.

• Inner layer: NBR rubber for fuel and oil resistance.
• Reinforcement: polyester-coated thread for pressure strength.
• Outer jacket: CPE for abrasion and weather resistance.
• Engineered for petrol, diesel, oil and related fluids.

How easy is it to install and seal this push-lock hose?

Installation is straightforward: push-fit connections provide quick assembly while the included clamps ensure extra sealing and mechanical retention. For best results measure fittings and cut the hose square before inserting; clamps are recommended on high-vibration or high-heat applications.

• Push-to-lock design for fast connections.
• Includes 10 hose clamps sized 13–19 mm for added sealing.
• Recommended: cut square and use clamps where vibration or heat is present.
• Tip: verify inner diameter (0.38") and outer diameter (0.65") before purchase.

What dimensions and kit contents should I expect?

The hose measures 20 feet long with an internal diameter of 0.38 inches and an outer diameter of 0.65 inches—standard for 3/8" (6AN) applications. The kit also provides ten clamps sized to fit common push-lock and barbed connections.

• Length: 20 feet (approx. 6.1 m).
• Inner diameter: 0.38 in (3/8").
• Outer diameter: 0.65 in.
• Clamps: 10 pieces, 13–19 mm range.

Who this is for: This EVIL ENERGY fuel line kit suits mechanics, performance fabricators, and vehicle owners who need a durable, fuel-compatible 3/8" hose for fuel filters, pumps, regulators, tanks and oil cooler lines. It’s appropriate for DIY upgrades, repairs and custom plumbing where a flexible, high-pressure rated push-lock solution plus clamp backup is required. Always confirm hose diameter and clamp range match your fittings before installation and adhere to safe routing and clamping practices.