EVIL ENERGY 6AN Billet Inline Fuel Filter — 30 Micron Sintered Bronze, Black Aluminum, Reusable Compact 2.07"

The EVIL ENERGY 6AN billet inline fuel filter is a compact, reusable aluminum filter with a 30-micron sintered bronze element designed to protect EFI and carbureted fuel systems in cars, motorcycles and boats.

This compact inline unit combines durable billet aluminum construction with a fine 30-micron sintered bronze element to trap contaminants while maintaining steady flow. Sized for tight engine bays, the filter accepts 6AN fittings and is compatible with gasoline, diesel, E85 and most other automotive fuels. Its reusable design and O-ring sealing make it practical for long-term service where reliable fuel delivery matters.

How does this filter keep my engine’s fuel clean?

The EVIL ENERGY filter uses a sintered bronze media rated at 30 microns to capture particles that can damage injectors, carburetors and pumps. Because the bronze element is sintered (metal bonded), it resists heat and corrosion better than many paper or mesh alternatives and can be cleaned and reused.

• 30-micron sintered bronze element for consistent particle retention
• Durable aluminum housing resists corrosion and heat
• Reusable element reduces replacement frequency and cost
• Effective with gasoline, diesel, E85 and mixed fuels

Will it fit my vehicle and plumbing setup?

This inline filter features 6AN inlet and outlet ports and measures roughly 2.07 inches (52.6 mm) long excluding fittings, making it a good choice where space is limited. It supports both EFI and carbureted systems and performs across automotive, motorcycle and marine applications as long as the plumbing and flow requirements match.

• 6AN fittings standard for many aftermarket fuel lines and adapters
• Compact 2.07" housing for tight engine bay installations
• Compatible with EFI and carburetor systems, plus motorcycles and boats
• Flow capability up to ~900 liters/hour with low pressure drop

How reliable is the seal and overall assembly?

EVIL ENERGY equips this billet filter with a molded rubber O-ring at the end cap joint to provide a leak-resistant interface between fittings and housing. After installation it’s recommended to check all connections for leaks under pressure; the robust construction reduces the risk of deformation or failure during normal operation.

• Durable rubber O-ring for a secure, leak-resistant seal
• Solid billet aluminum body resists torsion and impact
• Simple end-cap design for easy element access and cleaning
• Low pressure drop (under 1 PSI) at rated flow maintains fuel delivery

How do I maintain the filter and element?

The sintered bronze element is designed for repeated cleaning rather than frequent replacement. Remove the end cap, extract the element, and clean it with an appropriate solvent or degreaser; allow it to dry before reinstalling. Inspect the O-ring and fittings for wear and replace if necessary to keep a reliable seal.

• Disassemble end cap to access sintered bronze element
• Clean with solvent, brush gently, and dry completely before reuse
• Inspect O-ring; replace if cracked or flattened
• Recheck connections and test for leaks after reassembly

Who is this for: The EVIL ENERGY 6AN billet inline fuel filter is intended for enthusiasts and DIY mechanics who need a compact, durable inline filter for performance engines, motorcycles and marine craft. It works well for those running aftermarket fuel lines or tight installations who want a reusable 30-micron solution to protect injectors, carburetors and pumps without sacrificing flow.