FalconSupply Trombetta 684-1261-212 12V PowerSeal Contactor Kit — OEM, IP67 sealed with hardware & grease

Genuine Trombetta 684-1261-212 PowerSeal 12V solenoid contactor kit engineered to reliably switch high-current DC loads for hydraulic pumps, liftgates, snowplows, dump trailers and similar equipment.

This FalconSupply kit contains the OEM Trombetta 684-1261-212 PowerSeal contactor plus a complete hardware set and dielectric grease for a professional, weatherproof installation. Built to meet demanding electrical and environmental requirements, the sealed contactor manages motor inrush currents and provides durable service in outdoor and industrial settings. The package is intended as a direct-fit replacement for many factory part numbers used across brands such as Meyer, Maxon, Big Tex, Boss and Bucher.

How does this kit improve reliability on hydraulic pump systems?

The Trombetta PowerSeal contactor is designed to handle large motor startup currents and frequent cycling that hydraulic pump motors generate. Its sealed housing prevents dust and water intrusion while the copper contacts tolerate high inrush without rapid wear.

• IP67-rated sealed housing protects internal components from moisture and debris
• 800A peak inrush capacity for safe motor starts
• High-quality copper contacts reduce contact erosion
• Included dielectric grease prevents terminal corrosion over time

What comes in the FalconSupply OEM installation kit?

The kit includes the genuine Trombetta 684-1261-212 contactor plus the specific fasteners you need and an AGS DP-1 dielectric grease packet to seal electrical connections. Hardware selection matches terminal sizes on the contactor for a secure, vibration-resistant installation.

• One Trombetta 684-1261-212 PowerSeal contactor (12V)
• Two 5/16-24 serrated flange nuts for the power studs
• Two 10-32 serrated flange nuts for control studs
• One AGS DP-1 packet of dielectric grease for moisture protection

Will this part fit my equipment and how do I verify compatibility?

This contactor is a direct new-match for many OEM numbers and widely used across liftgates, snowplows, dump trailers, golf carts, RVs and forklifts. Confirm that your original mount uses the curved "L" shaped bracket and compare stud sizes to ensure a correct mechanical and electrical fit.

• Cross-references include Meyer 15220, Maxon 284080-01, Genie 112308GT and others
• Check for the curved "L" shaped mounting bracket on your existing part
• Verify power and control stud sizes (5/16-24 and 10-32) before installation
• Contact FalconSupply with OEM part numbers for fitment assistance

How should I maintain the contactor for long service life?

Regular visual inspections and keeping terminals free of corrosion extend service life. Use the included dielectric grease on exposed terminals and follow torque recommendations for serrated nuts to prevent loosening under vibration.

• Apply AGS DP-1 grease to terminals to block moisture and salts
• Inspect seal integrity and housing for cracks periodically
• Retorque flange nuts after initial service hours and at intervals
• Replace when contact resistance increases or physical damage appears

Who is this for: This FalconSupply Trombetta kit is intended for technicians, fleet managers and owners performing repairs or upgrades on 12V DC motor-driven equipment where durable, OEM-grade switching is required. It suits anyone replacing worn solenoids on hydraulic pump systems, liftgates, dump trailers, snowplows, golf carts, RVs or material-handling machinery who needs a weatherproof, high-current contactor with authentic OEM specifications and a complete installation hardware set.