NICECNC Kickstand Lift Block for Harley Road King & Street Glide — Black 1" Stackable, Precision-Machined Stability

If your Harley sits too upright or leans sharply because of taller shocks, larger front wheels, or fork changes, a simple lift under the kickstand can make a big difference. The NICECNC Kickstand Lift Block is a precision-machined bracket that bolts to the existing kickstand foot to increase ground clearance and change the bike's resting angle without permanent frame modifications. It's designed to be user-installed and reversible, offering a practical way to stabilize your bike when parked.

How does the lift block change my bike's parking angle?

The block adds measured height at the kickstand foot so the motorcycle rests at a slightly different tilt. Each block adds approximately 1 inch of effective kickstand height; stacking two blocks provides about 2 inches of lift. By increasing the stand height you reduce excessive leaning, which makes mounting and dismounting safer and helps prevent tip-over on softer surfaces.

• One block = ~1" increase in kickstand height.
• Stack two blocks to achieve ~2" total lift.
• Alters resting angle to reduce lean and improve balance.
• Works on firm, level surfaces and improves stability on pavement.

Will this fit my Harley Road King or Street Glide model?

The NICECNC block is built to fit a broad range of Harley-Davidson Road King and Street Glide variants from the model years listed. Confirm fitment by checking the product listing for your exact year and model—Road King FLHR (1994–2024), Road King Special FLHRXS (2017–2024), and Street Glide FLHX (2006–2024) are covered. If your bike has non-stock kickstand geometry, compare dimensions before installation.

• Compatible with FLHR, FLHRXS, FLHX model ranges shown.
• Verify your model year against the fitment list prior to purchase.
• Works with many common aftermarket suspension and wheel setups.
• Not intended to permanently modify factory kickstand structure.

How do I install the NICECNC kickstand lift block?

Installation is straightforward: position the bracket on the kickstand foot, mark hole locations, drill two mounting holes, then fasten using the supplied hardware. The block ships with the necessary bolts so you can complete the job at home with basic tools. Because it mounts externally, removal or reconfiguration (single or stacked) is quick and reversible.

• Mark kickstand, drill two holes for mounting.
• Secure bracket using the included hardware for a snug fit.
• Stack a second bracket and repeat mounting for additional lift.
• No welding or permanent frame changes required.

What materials and finishes are used, and will it withstand road use?

The bracket is precision-made and finished in black to blend with factory components and resist corrosion. It’s designed for the stresses of normal parking loads and daily riding conditions when properly installed. Routine inspection of fasteners and bracket condition after installation is recommended, as with any aftermarket part.

• Durable black finish for corrosion resistance and visual match.
• Machined to fit securely to kickstand foot when mounted correctly.
• Handles standard parking loads; inspect periodically.
• Stackable design keeps installation clean and reversible.

Who is this for: riders of Harley Road King and Street Glide models who have raised suspensions, larger front wheels, or aftermarket forks and need a simple, reversible solution to excessive lean when parked. It's ideal for owners who want an easy DIY upgrade to improve parking stability without permanent modifications, and for riders who frequently park on pavement or hard-packed surfaces where a small change in kickstand height makes a real difference.