ReluxGo Wheel Bearing Puller Kit for Harley-Davidson — Red, 3/4", 1" & 25mm Bearings, Press & Puller

The ReluxGo Wheel Bearing Puller Removal Motorcycle Tool Kit is a compact, heat-treated carbon steel press and puller set designed to remove and install 3/4", 1" and 25 mm sealed wheel bearings on Harley-Davidson models from 2000 onward.

If you service H-D wheels at home or in a small shop, this kit gives a straightforward, damage-minimizing way to extract and fit sealed hub bearings used on many Twin Cam, Sportster and VRSC bikes. The set bundles plates, bolts, dowels and a carrying case so you can work without improvising adapters, and the hardened finish resists wear and corrosion for repeated use.

How does this kit remove bearings without harming the wheel?

The kit uses shaped puller plates and matching bolts to apply even axial force to the bearing race so the hub isn’t stressed. Because the components engage the bearing securely and pull it straight out, you avoid prying at seals or hammering the hub—common causes of rim and seal damage.

• Upgrade puller plate geometry holds the bearing evenly during extraction
• Bolts and dowels align parts to prevent off-center pulling
• Heat-treated carbon steel construction reduces flex under load

Which Harley-Davidson models and bearing sizes will this fit?

This kit is engineered for Harleys manufactured since 2000 and covers common sealed hub bearing sizes: 3/4", 1" and 25 mm. It’s compatible with many Twin Cam, Sportster and VRSC wheel assemblies, but always verify your bike’s bearing dimensions before use.

• 3/4" and 1" bearing compatibility for older hub designs
• 25 mm size for many modern sealed wheel bearings
• Works across multiple models produced from 2000 to present when sizes match

What’s included and how durable are the components?

The kit arrives with all the hardware needed to perform removal and installation: pullers, guide plates, bolts, dowels, plus a storage case and gloves. Components are phosphated and black-finished after heat treatment for corrosion resistance and long life under workshop conditions.

• Puller plates and mating bolts sized for specified bearings
• Alignment dowels to center the tool during operation
• Carrying case and gloves for transport and cleaner handling

How do I use the tool safely and effectively?

Set the appropriate plate and dowel combination to match your bearing, center the assembly on the hub, and tighten the pulling bolt evenly until the bearing releases. Use steady, controlled torque—avoid sudden impacts—and inspect hub surfaces after removal before installing the new bearing.

• Select the correct plate/dowel for the bearing size and seat type
• Tighten evenly with a wrench; do not use an impact gun on final pull
• Clean and inspect hub bore before pressing in the replacement bearing

Who is this for? The ReluxGo Wheel Bearing Puller Removal Kit is aimed at motorcycle owners, independent mechanics and small shops servicing Harley-Davidson bikes who want a reliable, purpose-built solution for bearing service. It’s especially useful for do-it-yourselfers who prefer to avoid dealer labor costs, and for technicians who need a portable, durable kit that handles the most common sealed wheel bearing sizes found on Harleys since 2000.