Shanrya Bearing Race Puller — Universal 1-1/8–2-5/8in Metal Steering Neck Remover, Heavy-Duty

The Shanrya Bearing Race Puller is a heavy-duty metal tool designed to remove steering-neck bearing races with inner diameters from 1‑1/8in to 2‑5/8in quickly and reliably.

Built for motorcycle mechanics and home enthusiasts alike, this steering neck bearing race remover simplifies the most stubborn race extractions without specialized presses. Its solid metal construction resists bending and cracking so you can use it frequently in the shop or at the roadside. The tool operates by expanding inside the race, tightening against the inner edge, then delivering a controlled impact from the opposite end to dislodge the race cleanly.

How does the Shanrya puller remove bearing races safely?

The puller secures itself inside the bearing race then transfers impact force outward, minimizing damage to the steering neck and surrounding bearings. Because it works from within the race, it avoids prying on the race edge and lowers the risk of scoring or bending the frame.

• Insert the tool into the steering neck bore until it contacts the race inner edge.
• Tighten the central bolt to expand and lock the remover inside the race.
• Strike the opposite end with a hammer to drive the race outward.

Will this tool fit my motorcycle’s steering races?

The Shanrya puller fits bearing races with inner diameters approximately from 1‑1/8in (2.86cm) up to 2‑5/8in (6.67cm), covering many common motorcycle and autocycle applications. Its universal fit design accommodates a wide range of makes and models, though very small scooters or oversized off-road steering assemblies may fall outside the range.

• Coverage: approx. 1‑1/8in to 2‑5/8in inner diameters.
• Suitable for street motorcycles, cruisers, standards, and many off-road bikes.
• Not intended for bearing races smaller than the lower limit or larger than the upper limit.

How durable and reliable is the material?

Manufactured from hardened metal, the puller resists deformation under repeated impacts so you can extract multiple races over time without tool failure. Its robust build helps maintain consistent performance in demanding workshop conditions and during frequent roadside repairs.

• Constructed from strong metal to resist bending and cracking.
• Designed for repeated use in both professional and home settings.
• Simple geometry and few parts reduce maintenance and failure points.

What steps should I follow for safe operation?

Use the correct insertion depth, tighten the central bolt firmly, and apply measured hammer strikes to the tool’s opposite end. Wear eye protection and keep the steering assembly supported to prevent sudden movement when the race releases.

• Support the fork/steering assembly before starting removal.
• Insert, tighten, and check that the remover grips the race before striking.
• Use controlled impacts and inspect the neck and race seat after removal.

Who is this for: The Shanrya Steering Neck Bearing Race Puller is aimed at motorcycle mechanics, garage owners, restoration hobbyists, and riders who perform their own maintenance. If you regularly service steering heads or remove stubborn races, this universal, heavy-duty tool will speed up jobs and reduce the risk of damage compared with improvised methods. It ships as a single ready-to-use remover, making it a practical addition to any toolkit where steering-head bearings are serviced.