Victron Energy VE.Direct Cable — 32.81 ft (10 m) Shielded Data Cable for GX Controllers, Chargers, Inverters

Victron Energy VE.Direct Cable, 32.81 ft, is a purpose-built communication cable that links two VE.Direct-equipped devices for data exchange and system control.

This 32.81-foot (10 meter) VE.Direct cable from Victron Energy provides a reliable physical connection between GX controllers, displays, chargers, inverters, and other Victron products fitted with VE.Direct ports. Built to the brand's electrical and mechanical standards, the cable preserves signal integrity over longer runs so you can place components where they work best in your boat, RV, or off-grid setup.

How does this cable keep data reliable across a longer run?

The cable uses VE.Direct wiring and shielding specified by Victron Energy to minimize noise and signal loss over a 32.81 ft length. That means stable telemetry, remote control, and firmware communication even when devices are not adjacent. It’s engineered for the electrical environment typical of marine, mobile and stationary power systems.

• 10 meter length for flexible device placement
• VE.Direct pinout and shielding for consistent data transfer
• Compatible with Victron GX devices, chargers, inverters, and monitoring units
• Maintains telemetry and control signals across extended runs

Which Victron products can I connect with this cable?

The 32.81 ft VE.Direct cable is designed to join any two Victron products that use a VE.Direct port. That includes many GX-series controllers, BMV battery monitors (with VE.Direct), MPPT solar controllers, and select chargers or VE.Direct-enabled accessories. Check each device’s specifications for a VE.Direct connector to confirm compatibility.

• GX control units to other GX or VE.Direct devices
• MPPT solar controllers for remote monitoring
• Battery monitors that output VE.Direct telemetry
• Chargers or inverters with VE.Direct interface

What installation or handling details should I know?

Installing the cable is straightforward: plug each end into the VE.Direct ports of the devices you want to link. Avoid sharp bends and secure the cable to reduce strain on connectors; Victron offers both straight and 90° connector variants for routing flexibility. For permanent installations, use cable management and strain relief to prevent wear from vibration or movement.

• Straight or 90° connector options for tight spaces
• Keeps connectors strain-free when properly secured
• Suitable for marine and mobile installations when fastened
• Follow product manuals for port orientation and firmware pairing

Can I substitute a different cable length or type?

Victron Energy supplies VE.Direct cables in multiple lengths to suit various layouts; the 32.81 ft variant is chosen when longer separation is needed. While alternative lengths are available, ensure any replacement follows VE.Direct wiring and shielding requirements to avoid communication issues. Use genuine Victron cables or tested equivalents to preserve warranty and performance.

• Available in multiple lengths for shorter or longer runs
• Choose straight or 90° connectors for best fit
• Non-standard cables risk signal degradation if not VE.Direct compliant
• Recommended to use genuine or certified replacement cables

Who is this for: installers, boaters, RV owners, and off-grid system builders who need a trustworthy 10 m VE.Direct cable to place Victron components where they perform best. If you are pairing GX controllers, linking a battery monitor to a central display, or running an MPPT data line across a boat or vehicle, the Victron Energy VE.Direct Cable 32.81 ft gives the extra reach and the compatibility required for clean system communication.